T320XXU1ANB1 Android 4.4.2 KK Firmware For Galaxy Tab Pro 8.4 SM-T320 - How To Guide

T320XXU1ANB1 Android 4.4.2 KitKat Odin flashable download link available now. XXU1ANB1 Android 4.4.2 KitKat firmware update for Samsung Galaxy Tab Pro 8.4 SM-T320 rolled out recently in various countries including Portugal and Nordic countries (complete country list available at later section). Apart from manual update using Odin tool, you can also update your device to XXU1ANB1 firmware through KIES or via OTA update. The device comes with Android 4.4.2 KitKat by default, hence expect only bug fixes and performance tweaks with this update. Continue reading this guide to learn how to get official stock T320XXU1ANB1 Android 4.4.2 KitKat firmware running on Galaxy Tab Pro 8.4 SM-T320. Nearly all possible ways to update your device to this firmware is discussed here. One thing you should note that flashing or installing official firmware restore kernel, as a result your root access will be void, in short it will unroot it.

T320XXU1ANB1 Android 4.4.2 KitKat stock firmware available on both OTA and Kies update. However, if you can’t get it from there then you can always flash T320XXU1ANB1 Android 4.4.2 KitKat firmware on Galaxy Tab Pro 8.4 SM-T320 manually. We will discuss all available update methods. You should always try OTA or Kies method first and when both method don’t work then only try manual flashing.

Know Your Firmware

A. XXU1ANB1 Android 4.4.2 KitKat Available In Following Countries:

Portugal (TPH) and Nordic countries.

You can always flash same firmware in various countries however, keep in mind you shouldn't attempt flashing a carrier branded firmware on other countries. For example, you can install a firmware that rolled out for Hungary in Uruguay but you can't flash Hungary (VDH) firmware when your country is Uruguay.

B. Know Your Firmware By File Name:

Each firmware file name comes with a specific pattern. For example if firmware file name is T320XXU1ANB1_T320LUX1ANB2_LUX.zip then T320XXU1ANB1 is the PDA, T320LUX1ANB2 is CSC and LUX is the country or carrier code.

C. How To Root T320XXU1ANB1 Android 4.4.2 KitKat Firmware?

Root T320XXU1ANB1 Galaxy Tab Pro 8.4 SM-T320 Android 4.4.2 KitKat Firmware - How To Guide
Galaxy Tab Pro 8.4

Warning: This tutorial is only for Galaxy Tab Pro 8.4 SM-T320. Don’t try this guide on any other Android device. Also, we (True Android Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

Though official firmware restore all existing data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation such as bootloop fix.

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy Tab Pro 8.4 SM-T320 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Tab Pro 8.4 SM-T320. [Guide].

How To Update Galaxy Tab Pro 8.4 SM-T320 via OTA

  1. First of all make sure you have stable internet connection (Wi-Fi or data network) on your device.
  2. Now, go to Android app drawer and then select Settings.
  3. Then locate About Device and tap on it.
  4. Next select Software update from About device screen.
  5. Then tap on Update option.
  6. You should see an update, press OK to download and install. (Remember, download using 3G or network data will incur additional charges to your phone bill!)
  7. Soon your device will reboot to complete the installation process.
If you see “The latest update have already been installed” massage while checking update then your device yet to receive an OTA update. Check back within few days or jump to next procedure.

How To Update Galaxy Tab Pro 8.4 SM-T320 via Kies

  1. Make sure you have stable internet connection on your computer.
  2. Now download and install Samsung Kies on your computer.
  3. Turn on your device (if it off) and then connect it to computer with USB cable.
  4. Run Samsung Kies and wait for it to detect your device.
  5. You should see a New Firmware Upgrade is available at Samsung Kies home screen.
  6. Press the Firmware Upgrade button to proceed.
  7. Follow on screen instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.
Again! If you see “This is the latest firmware” in Samsung Kies, then your device yet to receive the latest update on Kies. Its good time to go for manual update instruction that located below.

[Note: You can install any firmware listed below despite availability in other countries, except those which comes with carrier name.]

* T320XXU1ANB1 Stock Firmware List Last Updated On February 18, 2014. 

T320XXU1ANB1 Android 4.4.2 KitKat Firmware Downloads

Portugal (TPH): T320XXU1ANB1_T320OXX1ANB2_TPH.zip

Nordic Countries: T320XXU1ANB1_T320NEE1ANB1_NEE.zip

[Please Note: After flashing this firmware you will lost any installed custom ROM including CM10.2, AOKP, Avatar, Beanstalk, Omni ROM, Slim ROM, Pac-Man, Paranoid Android, LiquidSmooth or Carbon.]

How To Install T320XXU1ANB1 Android 4.4.2 KitKat On Galaxy Tab Pro 8.4 SM-T320 Manually

  1. Download Odin v3.09.
  2. Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
  3. Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
  4. Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
  5. Now, put the Galaxy Tab Pro 8.4 SM-T320  in Download Mode by pressing and holding down the Volume Down button and the Power button together. A warning screen will come up; press Volume Up button to enter Download Mode.
  6. Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
  7. Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
  8. Click the AP Button, and select that .tar.md5 file that you get in Step 2. If you are using old Odin then add the file to PDA button.
  9. In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
  10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
  11. Once flashing completed, your Galaxy Tab Pro 8.4 SM-T320 will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
Congrats! You just updated your Galaxy Tab Pro 8.4 SM-T320 to Android 4.4.2 KitKat firmware. Go to Settings > About device to verify this firmware update.

Fix Boot Loop Issue On Galaxy Tab Pro 8.4 SM-T320

If Galaxy Tab Pro 8.4 SM-T320 stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:
  1. Go to recovery mode. To do so, press and hold the Volume Up and Power buttons together.
  2. Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option.
Please note, performing wiping task will erase your device internal memory data and not external SD card data.

How To Install T320XXU1ANB1 Android 4.4.2 KitKat Firmware On Galaxy Tab Pro 8.4 SM-T320 Without Using Computer

Mobile Odin yet not supporting your device when last checked. It might do soon. You can follow this guide if you manage to install Mobile Odin in your device. Download Mobile Odin From Play Store or can download APK of Mobile Odin Lite edition from here.
  1. Download the firmware file (extract if it is in zip), and copy the firmware file with .tar.md5 extension to your phone’s internal or external SD card storage.
  2. Open the Mobile Odin and go to “Open File” option and select the firmware file. Start flashing process.
  3. When it is complete, your Galaxy Tab Pro 8.4 SM-T320 will reboot automatically and on booting up, it will have the newly installed firmware
That’s it! Let us know about your latest Android 4.4.2 KitKat experience.