AD SPACE

Saturday, 19 April 2014

// //

S5312LUBANB2 Android 4.1.2 JB Firmware For Galaxy Pocket Neo Duos GT-S5312L - How To Guide

Download S5312LUBANB2 Android 4.1.2 Jelly Bean latest firmware for GT-S5312L, available since 20-April-2014. Install UBANB2 Android 4.1.2 Jelly Bean official firmware update on Samsung Galaxy Pocket Neo Duos GT-S5312L that rolled out in various countries including Panama; and can also be downloaded for a manual update. This new firmware update only brings bug fixes and performance tweaks on your Galaxy Pocket Neo Duos GT-S5312L. Continue reading this guide to learn how to get official stock S5312LUBANB2 Android 4.1.2 Jelly Bean firmware running on Galaxy Pocket Neo Duos GT-S5312L. Nearly all possible ways to update your device to this firmware is discussed here. One thing you should note that flashing or installing official firmware restore kernel hence your root access will be void, in short it will unroot it.

S5312LUBANB2 Android 4.1.2 Jelly Bean stock firmware available on both OTA and Kies update. However, if you can’t get it from there then you can always flash S5312LUBANB2 Android 4.1.2 Jelly Bean firmware on Galaxy Pocket Neo Duos GT-S5312L manually. We will discuss all available update methods. You should always try OTA or Kies method first and when both method don’t work then only try manual flashing.

Galaxy Pocket Neo Duos

Warning: This tutorial is only for Galaxy Pocket Neo Duos GT-S5312L. Don’t try this guide on any other Android device. Also, we are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

Though official firmware restore all existing data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation such as bootloop fix.

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Galaxy Pocket Neo Duos GT-S5312L in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Pocket Neo Duos GT-S5312L. [Guide].

How To Update Galaxy Pocket Neo Duos GT-S5312L via OTA

  1. First of all make sure you have stable internet connection (Wi-Fi or data network) on your device.
  2. Now, go to Android app drawer and then select Settings.
  3. Then locate About Device and tap on it.
  4. Next select Software update from About device screen.
  5. Then tap on Update option.
  6. You should see an update, press OK to download and install. (Remember, download using 3G or network data will incur additional charges to your phone bill!)
  7. Soon your device will reboot to complete the installation process.
If you see “The latest update have already been installed” massage while checking update then your device yet to receive an OTA update. Check back within few days or jump to next procedure.

How To Update Galaxy Pocket Neo Duos GT-S5312L via Kies

  1. Make sure you have stable internet connection on your computer.
  2. Now download and install Samsung Kies on your computer.
  3. Turn on your device (if it off) and then connect it to computer with USB cable.
  4. Run Samsung Kies and wait for it to detect your device.
  5. You should see a New Firmware Upgrade is available at Samsung Kies home screen.
  6. Press the Firmware Upgrade button to proceed.
  7. Follow on screen instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.
Again! If you see “This is the latest firmware” in Samsung Kies, then your device yet to receive the latest update on Kies. Its good time to go for manual update instruction that located below.

[Note: You can install any firmware listed below despite availability in other countries, except those which comes with carrier name.]

[Resumable and Torrent link will only be added when available from trusted source] 

* S5312LUBANB2 Stock Firmware List Last Updated On April 20, 2014. 

S5312LUBANB2 Android 4.1.2 Jelly Bean Firmware Downloads

Panama: TPA-S5312LUBANB2-20140327145351.zip
[Please Note: After flashing this firmware you will lost any installed custom ROM including CM11, AOKP, Avatar, Beanstalk, Omni ROM, Slim ROM, Pac-Man, Paranoid Android, LiquidSmooth or Carbon.]

How To Install S5312LUBANB2 Android 4.1.2 Jelly Bean On Galaxy Pocket Neo Duos GT-S5312L Manually

  1. Download Odin v3.09.
  2. Extract Firmware zip file that you downloaded earlier from above link, you will get a .tar.md5 file and some other files (optional).
  3. Extract Odin zip file and you will get Odin3 v3.09.exe along with few other files.
  4. Power off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
  5. Now, put the Galaxy Pocket Neo Duos GT-S5312L in Download Mode by pressing and holding down the Home & Volume Down button together while pressing the Power button. A warning screen will come up; press Volume Up button to enter Download Mode.
  6. Now run Odin3 v3.09.exe (see Step 3) as an Administrator because Admin privileges is required to complete the process smoothly (only applicable Windows Vista and higher).
  7. Now connect your device to your PC using USB cable. An “Added!!” massage will appear in Odin’s message box. If you don’t get the same then you should try another USB port (try USB port located in back in your desktop PC). If that too don’t work then you should reinstall the driver. If you successfully see the “Added!!” message in Odin then you are ready to go in next step. You should also see COM port with a number in Yellow if you successfully added your device.
  8. Click the AP Button, and select that .tar.md5 file that you get in Step 2.
  9. In Odin window, make sure only Auto Reboot and F. Reset Time checkboxes are selected.
  10. Double check everything that we mentioned in Step 8 & Step 9 above. Now, once satisfied hit the START button to begin the flashing process.
  11. Once flashing completed, your Galaxy Pocket Neo Duos GT-S5312L will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from computer.
Congrats! You just updated your Galaxy Pocket Neo Duos GT-S5312L to Android 4.1.2 Jelly Bean firmware. Go to Settings > About device to verify this firmware update.

Fix Boot Loop Issue On Galaxy Pocket Neo Duos GT-S5312L

If Galaxy Pocket Neo Duos GT-S5312L stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:
  1. Go to recovery mode. To do so, press and hold the Volume Up, Home and Power buttons together.
  2. Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option.
Please note, performing wiping task will erase your device internal memory data and not external SD card data.

That’s it! Let us know about your latest Android 4.1.2 Jelly Bean experience.
Read More
// //

Update Nexus 4 To Android 4.4.2 KitKat via C-RoM–How To

C-RoM v6.0 custom firmware for Nexus 4 is now available. With the help of C-RoM v6.0 ROM you can update your Nexus 4 to a well customized Android 4.4.2 KitKat. C-RoM development team recently released C-RoM v6.0 which comes with bug fixes and additional features. Some coll features of C-RoM are Pie, Halo, Appbar, Dark C-RoM, Active Display, Floating Windows, Gesture Anywhere, On-The-Go Mode, Animation Controls, Lockscreen notification and Implement App Sidebar. You can download and install custom firmware C-RoM v6.0 on your Nexus 4. Since, Nexus 4 is capable enough to run Android 4.4.2 KitKat smoothly, C-RoM v6.0 going to be a great experience for you. To learn how to flash this ROM, continue reading this guide to know how to install Android 4.4.2 KitKat based C-RoM v6.0 custom ROM on Nexus 4.

Related Readings:
Some of the cool Android 4.4.2 KitKat features that you will enjoy is Screen Recording, Tap to Pay (Google Wallet for everyone), NFC emulation for non nfc devices, 14% less memory usage, cloud printing from Gallery, Google Home is the new Launcher, Core System Processes Trimmed, apps are efficient and responsive on all devices, the all new 'procstats tool details' memory use, Full-screen Immersive mode, seamless change in resolution during media playback, Phone dialer got local business detection, redesigned Quickoffice and many more.

As said already, this ROM build is still under development and you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a better build.

What's New in C-RoM v6.0:
  • Bluetooth Headset FC seems to fixed
  • Add Trebuchet Instead Launcher3
  • Add Back Halo Icon
  • Add Back Stock Recent
  • Add blacklist provider permission
  • Add Support Mock SMS
  • SysUI: Use LocationController from status bar service for GPSTile
  • Fixed Battery Saver Tile
C-RoM KitKat

Warning!
 
This tutorial is only for Nexus 4. Don’t try this guide on any other Android device. Also, we (True Android Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for Nexus 4 in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Nexus 4. [Guide].

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.0 and up installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based C-RoM v6.0 ROM on Nexus 4.

File Required(Download by clicking on it)
  1. C-RoM v6.0 For Nexus 4  [Filename: C-RoM-KK-v6.0-20140418-mako.zip]
  2. Google Apps [Filename: GApps_Standard_4.4.2_signed.zip] or any other 4.4 KitKat GApps

How to Install Android 4.4.2 KitKat based C-RoM v6.0 ROM on Nexus 4

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your Nexus 4.
  3. Boot into recovery mode. Press and hold Volume Down + Power key together and release the Power key once the Google logo appears, but keep holding the Volume Down key. You will be in Bootloader mode now. Press Volume Down two times so that Recovery option appears, and then press Power key to reboot into recovery mode. Use Volume keys to browse between options in recovery while Power key to select an option. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard (or /sdcard1 for external storage). Now, locate the C-RoM v6.0 Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.2_signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Nexus 4 and boot up into Android 4.4.2 KitKat ROM C-RoM v6.0
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.
Tutorial For TWRP Recovery Users:
  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your Nexus 4.
  3. Boot into recovery mode. Press and hold Volume Down + Power key together and release the Power key once the Google logo appears, but keep holding the Volume Down key. You will be in Bootloader mode now. Press Volume Down two times so that Recovery option appears, and then press Power key to reboot into recovery mode. Alternatively try this: Recovery Mode without Key Combination.
  4. Create a Backup using TWRP Backup Option.
  5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
  6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the C-RoM v6.0 Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.2_signed.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
  7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your Nexus 4 and boot up into Android 4.4.2 KitKat ROM C-RoM v6.0.
  8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.
Congrats! Android 4.4.2 KitKat firmware based custom ROM C-RoM v6.0 is now installed and running on your Nexus 4. [Note: Root may turned off by default in CM ROM, To enable it, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings]
Read More
// //

Update HTC One To Android 4.4.2 KitKat via C-RoM–How To

C-RoM v5.9 custom firmware for HTC One is now available. With the help of C-RoM v5.9 ROM you can update your HTC One to a well customized Android 4.4.2 KitKat. C-RoM development team recently released C-RoM v5.9 which comes with bug fixes and additional features. Some coll features of C-RoM are Pie, Halo, Appbar, Dark C-RoM, Active Display, Floating Windows, Gesture Anywhere, On-The-Go Mode, Animation Controls, Lockscreen notification and Implement App Sidebar. You can download and install custom firmware C-RoM v5.9 on your HTC One. Since, HTC One is capable enough to run Android 4.4.2 KitKat smoothly, C-RoM v5.9 going to be a great experience for you. To learn how to flash this ROM, continue reading this guide to know how to install Android 4.4.2 KitKat based C-RoM v5.9 custom ROM on HTC One.

Related Readings:
Some of the cool Android 4.4.2 KitKat features that you will enjoy is Screen Recording, Tap to Pay (Google Wallet for everyone), NFC emulation for non nfc devices, 14% less memory usage, cloud printing from Gallery, Google Home is the new Launcher, Core System Processes Trimmed, apps are efficient and responsive on all devices, the all new 'procstats tool details' memory use, Full-screen Immersive mode, seamless change in resolution during media playback, Phone dialer got local business detection, redesigned Quickoffice and many more.

As said already, this ROM build is still under development and you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a better build.

What's New in C-RoM v5.9:
  • ART Fixed 
  • New Performance Control Instead CM Performance Options. 
  • Battery Saver Mode From Omni. 
  • New Bootanimations by PartimusPrime 
  • FixedBattery Stats Always Awake 
  • Removed HALO Icon From Statusbar 
  • Base: Floating window with multitasking 
  • Implement App circle sidebar 
  • App Circle sidebar (add support floating window) 
  • App Circle sidebar (add support Samsung multiwindow flags) 
  • SystemUI: allow hiding notification icons 
  • Revert "Reimplement PowerSaverManager !" & Revert "Suspend Actions" (seems to eating battery not saving lol.) 
  • Revert "TeloRadio" 
  • Slim IME settings 
  • Add SmartCover stubs 
  • Base: fix MultiSelectListPreference NPE 
  • base: Fix screen on stats after a boot 
  • Separate Change Encryption Password Entry 
  • Add dock battery support. 
  • Changed PacBusyDialog C-RoM Logo 
  • Changed C-Tool Icon by 972style 
  • Revert "SMS Breath" 
  • Fix Floating window bug 
  • msm8960: Remove duplicate audio firmware type 
  • hammerhead: Make SYSTEM owner of cpu online files 
  • Gallery2 - Add 6.2Mp resolution set 
  • Gallery2: Handled seek to previous frame in case of video trim 
  • Camera: Fix out-of-order operations while setting up the editor 
  • Camera2: if camera HAL does not return valid picture formats do not show wrong defaults 
  • Implement SMS mark for unread 
  • jflte: assert: add jflterefreshspr 
  • jflte: Add missing Permissions for Step Sensor

C-RoM KitKat

Warning!
 
This tutorial is only for HTC One. Don’t try this guide on any other Android device. Also, we (True Android Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for HTC One in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and HTC One. [Guide].

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.0 and up installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based C-RoM v5.9 ROM on HTC One.

File Required(Download by clicking on it)
  1. C-RoM v5.9 For HTC One  [Filename: C-RoM-KK-v5.9-20140411-m7.zip]
  2. Google Apps [Filename: GApps_Standard_4.4.2_signed.zip] or any other 4.4 KitKat GApps

How to Install Android 4.4.2 KitKat based C-RoM v5.9 ROM on HTC One

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your HTC One.
  3. Now, boot into recovery mode. To do so, press and hold Volume Down and Power button together to boot into HBOOT menu, from there select Recovery [use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard (or /sdcard1 for external storage). Now, locate the C-RoM v5.9 Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.2_signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your HTC One and boot up into Android 4.4.2 KitKat ROM C-RoM v5.9
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.
Tutorial For TWRP Recovery Users:
  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your HTC One.
  3. Now, boot into recovery mode. To do so, press and hold Volume Down and Power button together to boot into HBOOT menu, from there select Recovery [use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.
  4. Create a Backup using TWRP Backup Option.
  5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
  6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the C-RoM v5.9 Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.2_signed.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
  7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your HTC One and boot up into Android 4.4.2 KitKat ROM C-RoM v5.9.
  8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.
Congrats! Android 4.4.2 KitKat firmware based custom ROM C-RoM v5.9 is now installed and running on your HTC One. [Note: Root may turned off by default in CM ROM, To enable it, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings]
Read More
// //

Update T-Mobile HTC One To Android 4.4.2 KitKat via C-RoM–How To

C-RoM v5.9 custom firmware for T-Mobile HTC One is now available. With the help of C-RoM v5.9 ROM you can update your T-Mobile HTC One to a well customized Android 4.4.2 KitKat. C-RoM development team recently released C-RoM v5.9 which comes with bug fixes and additional features. Some coll features of C-RoM are Pie, Halo, Appbar, Dark C-RoM, Active Display, Floating Windows, Gesture Anywhere, On-The-Go Mode, Animation Controls, Lockscreen notification and Implement App Sidebar. You can download and install custom firmware C-RoM v5.9 on your T-Mobile HTC One. Since, T-Mobile HTC One is capable enough to run Android 4.4.2 KitKat smoothly, C-RoM v5.9 going to be a great experience for you. To learn how to flash this ROM, continue reading this guide to know how to install Android 4.4.2 KitKat based C-RoM v5.9 custom ROM on T-Mobile HTC One.

Related Readings:
Some of the cool Android 4.4.2 KitKat features that you will enjoy is Screen Recording, Tap to Pay (Google Wallet for everyone), NFC emulation for non nfc devices, 14% less memory usage, cloud printing from Gallery, Google Home is the new Launcher, Core System Processes Trimmed, apps are efficient and responsive on all devices, the all new 'procstats tool details' memory use, Full-screen Immersive mode, seamless change in resolution during media playback, Phone dialer got local business detection, redesigned Quickoffice and many more.

As said already, this ROM build is still under development and you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a better build.

What's New in C-RoM v5.9:
  • ART Fixed 
  • New Performance Control Instead CM Performance Options. 
  • Battery Saver Mode From Omni. 
  • New Bootanimations by PartimusPrime 
  • FixedBattery Stats Always Awake 
  • Removed HALO Icon From Statusbar 
  • Base: Floating window with multitasking 
  • Implement App circle sidebar 
  • App Circle sidebar (add support floating window) 
  • App Circle sidebar (add support Samsung multiwindow flags) 
  • SystemUI: allow hiding notification icons 
  • Revert "Reimplement PowerSaverManager !" & Revert "Suspend Actions" (seems to eating battery not saving lol.) 
  • Revert "TeloRadio" 
  • Slim IME settings 
  • Add SmartCover stubs 
  • Base: fix MultiSelectListPreference NPE 
  • base: Fix screen on stats after a boot 
  • Separate Change Encryption Password Entry 
  • Add dock battery support. 
  • Changed PacBusyDialog C-RoM Logo 
  • Changed C-Tool Icon by 972style 
  • Revert "SMS Breath" 
  • Fix Floating window bug 
  • msm8960: Remove duplicate audio firmware type 
  • hammerhead: Make SYSTEM owner of cpu online files 
  • Gallery2 - Add 6.2Mp resolution set 
  • Gallery2: Handled seek to previous frame in case of video trim 
  • Camera: Fix out-of-order operations while setting up the editor 
  • Camera2: if camera HAL does not return valid picture formats do not show wrong defaults 
  • Implement SMS mark for unread 
  • jflte: assert: add jflterefreshspr 
  • jflte: Add missing Permissions for Step Sensor

C-RoM KitKat

Warning!
 
This tutorial is only for T-Mobile HTC One. Don’t try this guide on any other Android device. Also, we (True Android Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for T-Mobile HTC One in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and T-Mobile HTC One. [Guide].

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.0 and up installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based C-RoM v5.9 ROM on T-Mobile HTC One.

File Required(Download by clicking on it)
  1. C-RoM v5.9 For T-Mobile HTC One  [Filename: C-RoM-KK-v5.9-20140411-m7.zip]
  2. Google Apps [Filename: GApps_Standard_4.4.2_signed.zip] or any other 4.4 KitKat GApps

How to Install Android 4.4.2 KitKat based C-RoM v5.9 ROM on T-Mobile HTC One

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your T-Mobile HTC One.
  3. Now, boot into recovery mode. To do so, press and hold Volume Down and Power button together to boot into HBOOT menu, from there select Recovery [use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard (or /sdcard1 for external storage). Now, locate the C-RoM v5.9 Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.2_signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your T-Mobile HTC One and boot up into Android 4.4.2 KitKat ROM C-RoM v5.9
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.
Tutorial For TWRP Recovery Users:
  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your T-Mobile HTC One.
  3. Now, boot into recovery mode. To do so, press and hold Volume Down and Power button together to boot into HBOOT menu, from there select Recovery [use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.
  4. Create a Backup using TWRP Backup Option.
  5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
  6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the C-RoM v5.9 Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.2_signed.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
  7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your T-Mobile HTC One and boot up into Android 4.4.2 KitKat ROM C-RoM v5.9.
  8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.
Congrats! Android 4.4.2 KitKat firmware based custom ROM C-RoM v5.9 is now installed and running on your T-Mobile HTC One. [Note: Root may turned off by default in CM ROM, To enable it, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings]
Read More
// //

Update AT&T HTC One To Android 4.4.2 KitKat via C-RoM–How To

C-RoM v5.9 custom firmware for AT&T HTC One is now available. With the help of C-RoM v5.9 ROM you can update your AT&T HTC One to a well customized Android 4.4.2 KitKat. C-RoM development team recently released C-RoM v5.9 which comes with bug fixes and additional features. Some coll features of C-RoM are Pie, Halo, Appbar, Dark C-RoM, Active Display, Floating Windows, Gesture Anywhere, On-The-Go Mode, Animation Controls, Lockscreen notification and Implement App Sidebar. You can download and install custom firmware C-RoM v5.9 on your AT&T HTC One. Since, AT&T HTC One is capable enough to run Android 4.4.2 KitKat smoothly, C-RoM v5.9 going to be a great experience for you. To learn how to flash this ROM, continue reading this guide to know how to install Android 4.4.2 KitKat based C-RoM v5.9 custom ROM on AT&T HTC One.

Related Readings:
Some of the cool Android 4.4.2 KitKat features that you will enjoy is Screen Recording, Tap to Pay (Google Wallet for everyone), NFC emulation for non nfc devices, 14% less memory usage, cloud printing from Gallery, Google Home is the new Launcher, Core System Processes Trimmed, apps are efficient and responsive on all devices, the all new 'procstats tool details' memory use, Full-screen Immersive mode, seamless change in resolution during media playback, Phone dialer got local business detection, redesigned Quickoffice and many more.

As said already, this ROM build is still under development and you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a better build.

What's New in C-RoM v5.9:
  • ART Fixed 
  • New Performance Control Instead CM Performance Options. 
  • Battery Saver Mode From Omni. 
  • New Bootanimations by PartimusPrime 
  • FixedBattery Stats Always Awake 
  • Removed HALO Icon From Statusbar 
  • Base: Floating window with multitasking 
  • Implement App circle sidebar 
  • App Circle sidebar (add support floating window) 
  • App Circle sidebar (add support Samsung multiwindow flags) 
  • SystemUI: allow hiding notification icons 
  • Revert "Reimplement PowerSaverManager !" & Revert "Suspend Actions" (seems to eating battery not saving lol.) 
  • Revert "TeloRadio" 
  • Slim IME settings 
  • Add SmartCover stubs 
  • Base: fix MultiSelectListPreference NPE 
  • base: Fix screen on stats after a boot 
  • Separate Change Encryption Password Entry 
  • Add dock battery support. 
  • Changed PacBusyDialog C-RoM Logo 
  • Changed C-Tool Icon by 972style 
  • Revert "SMS Breath" 
  • Fix Floating window bug 
  • msm8960: Remove duplicate audio firmware type 
  • hammerhead: Make SYSTEM owner of cpu online files 
  • Gallery2 - Add 6.2Mp resolution set 
  • Gallery2: Handled seek to previous frame in case of video trim 
  • Camera: Fix out-of-order operations while setting up the editor 
  • Camera2: if camera HAL does not return valid picture formats do not show wrong defaults 
  • Implement SMS mark for unread 
  • jflte: assert: add jflterefreshspr 
  • jflte: Add missing Permissions for Step Sensor

C-RoM KitKat

Warning!
 
This tutorial is only for AT&T HTC One. Don’t try this guide on any other Android device. Also, we (True Android Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

Pre Requisites:

1. Backup your device data. You can follow our ultimate backup guide.

2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

3. You already have USB Driver Installed for AT&T HTC One in your PC. [Download USB Drivers]

4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and AT&T HTC One. [Guide].

5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.0 and up installed. [Guide]

If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based C-RoM v5.9 ROM on AT&T HTC One.

File Required(Download by clicking on it)
  1. C-RoM v5.9 For AT&T HTC One  [Filename: C-RoM-KK-v5.9-20140411-m7.zip]
  2. Google Apps [Filename: GApps_Standard_4.4.2_signed.zip] or any other 4.4 KitKat GApps

How to Install Android 4.4.2 KitKat based C-RoM v5.9 ROM on AT&T HTC One

  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your AT&T HTC One.
  3. Now, boot into recovery mode. To do so, press and hold Volume Down and Power button together to boot into HBOOT menu, from there select Recovery [use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.
  4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
  5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
  6. Select install zip from sdcard, then select choose zip from sdcard (or /sdcard1 for external storage). Now, locate the C-RoM v5.9 Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
  7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.2_signed.zip file instead of ROM zip to install the Google apps package.
  8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your AT&T HTC One and boot up into Android 4.4.2 KitKat ROM C-RoM v5.9
  9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.
Tutorial For TWRP Recovery Users:
  1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
  2. Disconnect USB and then turn off your AT&T HTC One.
  3. Now, boot into recovery mode. To do so, press and hold Volume Down and Power button together to boot into HBOOT menu, from there select Recovery [use volume buttons to scroll and Power button to select]. Alternatively try this: Recovery Mode without Key Combination.
  4. Create a Backup using TWRP Backup Option.
  5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
  6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the C-RoM v5.9 Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.2_signed.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
  7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your AT&T HTC One and boot up into Android 4.4.2 KitKat ROM C-RoM v5.9.
  8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.
Congrats! Android 4.4.2 KitKat firmware based custom ROM C-RoM v5.9 is now installed and running on your AT&T HTC One. [Note: Root may turned off by default in CM ROM, To enable it, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings]
Read More
// //

Update Galaxy Note 3 SM-N900P Sprint To Android 4.4.2 KitKat via C-RoM–How To

C-RoM v5.5 custom firmware for Galaxy Note 3 SM-N900P (Sprint) is now available. With the help of C-RoM v5.5 ROM you can update your Galaxy Note 3 SM-N900P (Sprint) to a well customized Android 4.4.2 KitKat. C-RoM development team recently released C-RoM v5.5 which comes with bug fixes and additional features. Some coll features of C-RoM are Pie, Halo, Appbar, Dark C-RoM, Active Display, Floating Windows, Gesture Anywhere, On-The-Go Mode, Animation Controls, Lockscreen notification and Implement App Sidebar. You can download and install custom firmware C-RoM v5.5 on your Galaxy Note 3 SM-N900P (Sprint). Since, Galaxy Note 3 SM-N900P (Sprint) is capable enough to run Android 4.4.2 KitKat smoothly, C-RoM v5.5 going to be a great experience for you. To learn how to flash this ROM, continue reading this guide to know how to install Android 4.4.2 KitKat based C-RoM v5.5 custom ROM on Galaxy Note 3 SM-N900P (Sprint).

Related Readings:
    Some of the cool Android 4.4.2 KitKat features that you will enjoy is Screen Recording, Tap to Pay (Google Wallet for everyone), NFC emulation for non nfc devices, 14% less memory usage, cloud printing from Gallery, Google Home is the new Launcher, Core System Processes Trimmed, apps are efficient and responsive on all devices, the all new 'procstats tool details' memory use, Full-screen Immersive mode, seamless change in resolution during media playback, Phone dialer got local business detection, redesigned Quickoffice and many more.

    As said already, this ROM build is still under development and you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a better build.

    What's New in C-RoM v5.5:
    • ART Fixed 
    • New Performance Control Instead CM Performance Options. 
    • Battery Saver Mode From Omni. 
    • New Bootanimations by PartimusPrime 
    • FixedBattery Stats Always Awake 
    • Removed HALO Icon From Statusbar 
    • Base: Floating window with multitasking 
    • Implement App circle sidebar 
    • App Circle sidebar (add support floating window) 
    • App Circle sidebar (add support Samsung multiwindow flags) 
    • SystemUI: allow hiding notification icons 
    • Revert "Reimplement PowerSaverManager !" & Revert "Suspend Actions" (seems to eating battery not saving lol.) 
    • Revert "TeloRadio" 
    • Slim IME settings 
    • Add SmartCover stubs 
    • Base: fix MultiSelectListPreference NPE 
    • base: Fix screen on stats after a boot 
    • Separate Change Encryption Password Entry 
    • Add dock battery support. 
    • Changed PacBusyDialog C-RoM Logo 
    • Changed C-Tool Icon by 972style 
    • Revert "SMS Breath" 
    • Fix Floating window bug 
    • msm8960: Remove duplicate audio firmware type 
    • hammerhead: Make SYSTEM owner of cpu online files 
    • Gallery2 - Add 6.2Mp resolution set 
    • Gallery2: Handled seek to previous frame in case of video trim 
    • Camera: Fix out-of-order operations while setting up the editor 
    • Camera2: if camera HAL does not return valid picture formats do not show wrong defaults 
    • Implement SMS mark for unread 
    • jflte: assert: add jflterefreshspr 
    • jflte: Add missing Permissions for Step Sensor

    C-RoM KitKat

    Warning!
     
    This tutorial is only for Galaxy Note 3 SM-N900P (Sprint). Don’t try this guide on any other Android device. Also, we (True Android Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

    Pre Requisites:

    1. Backup your device data. You can follow our ultimate backup guide.

    2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

    3. You already have USB Driver Installed for Galaxy Note 3 SM-N900P (Sprint) in your PC. [Download USB Drivers]

    4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Note 3 SM-N900P (Sprint). [Guide].

    5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.0 and up installed. [Guide]

    If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based C-RoM v5.5 ROM on Galaxy Note 3 SM-N900P (Sprint).

    File Required(Download by clicking on it)
    1. C-RoM v5.5 For Galaxy Note 3 SM-N900P (Sprint)  [Filename: C-RoM-KK-v5.5-20140321-1135-hlte.zip]
    2. Google Apps [Filename: GApps_Standard_4.4.2_signed.zip] or any other 4.4 KitKat GApps

    How to Install Android 4.4.2 KitKat based C-RoM v5.5 ROM on Galaxy Note 3 SM-N900P (Sprint)

    1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
    2. Disconnect USB and then turn off your Galaxy Note 3 SM-N900P (Sprint).
    3. Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power to select an option. Alternatively try this: Recovery Mode without Key Combination.
    4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
    5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
    6. Select install zip from sdcard, then select choose zip from sdcard (or /sdcard1 for external storage). Now, locate the C-RoM v5.5 Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
    7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.2_signed.zip file instead of ROM zip to install the Google apps package.
    8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy Note 3 SM-N900P (Sprint) and boot up into Android 4.4.2 KitKat ROM C-RoM v5.5
    9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.
    Tutorial For TWRP Recovery Users:
    1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
    2. Disconnect USB and then turn off your Galaxy Note 3 SM-N900P (Sprint).
    3. Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. Alternatively try this: Recovery Mode without Key Combination.
    4. Create a Backup using TWRP Backup Option.
    5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
    6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the C-RoM v5.5 Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.2_signed.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
    7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your Galaxy Note 3 SM-N900P (Sprint) and boot up into Android 4.4.2 KitKat ROM C-RoM v5.5.
    8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.
    Congrats! Android 4.4.2 KitKat firmware based custom ROM C-RoM v5.5 is now installed and running on your Galaxy Note 3 SM-N900P (Sprint). [Note: Root may turned off by default in CM ROM, To enable it, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings]
    Read More
    // //

    Update Galaxy Note 3 SM-N900T T-Mobile To Android 4.4.2 KitKat via C-RoM–How To

    C-RoM v5.5 custom firmware for Galaxy Note 3 SM-N900T (T-Mobile) is now available. With the help of C-RoM v5.5 ROM you can update your Galaxy Note 3 SM-N900T (T-Mobile) to a well customized Android 4.4.2 KitKat. C-RoM development team recently released C-RoM v5.5 which comes with bug fixes and additional features. Some coll features of C-RoM are Pie, Halo, Appbar, Dark C-RoM, Active Display, Floating Windows, Gesture Anywhere, On-The-Go Mode, Animation Controls, Lockscreen notification and Implement App Sidebar. You can download and install custom firmware C-RoM v5.5 on your Galaxy Note 3 SM-N900T (T-Mobile). Since, Galaxy Note 3 SM-N900T (T-Mobile) is capable enough to run Android 4.4.2 KitKat smoothly, C-RoM v5.5 going to be a great experience for you. To learn how to flash this ROM, continue reading this guide to know how to install Android 4.4.2 KitKat based C-RoM v5.5 custom ROM on Galaxy Note 3 SM-N900T (T-Mobile).

    Related Readings:
      Some of the cool Android 4.4.2 KitKat features that you will enjoy is Screen Recording, Tap to Pay (Google Wallet for everyone), NFC emulation for non nfc devices, 14% less memory usage, cloud printing from Gallery, Google Home is the new Launcher, Core System Processes Trimmed, apps are efficient and responsive on all devices, the all new 'procstats tool details' memory use, Full-screen Immersive mode, seamless change in resolution during media playback, Phone dialer got local business detection, redesigned Quickoffice and many more.

      As said already, this ROM build is still under development and you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a better build.

      What's New in C-RoM v5.5:
      • ART Fixed 
      • New Performance Control Instead CM Performance Options. 
      • Battery Saver Mode From Omni. 
      • New Bootanimations by PartimusPrime 
      • FixedBattery Stats Always Awake 
      • Removed HALO Icon From Statusbar 
      • Base: Floating window with multitasking 
      • Implement App circle sidebar 
      • App Circle sidebar (add support floating window) 
      • App Circle sidebar (add support Samsung multiwindow flags) 
      • SystemUI: allow hiding notification icons 
      • Revert "Reimplement PowerSaverManager !" & Revert "Suspend Actions" (seems to eating battery not saving lol.) 
      • Revert "TeloRadio" 
      • Slim IME settings 
      • Add SmartCover stubs 
      • Base: fix MultiSelectListPreference NPE 
      • base: Fix screen on stats after a boot 
      • Separate Change Encryption Password Entry 
      • Add dock battery support. 
      • Changed PacBusyDialog C-RoM Logo 
      • Changed C-Tool Icon by 972style 
      • Revert "SMS Breath" 
      • Fix Floating window bug 
      • msm8960: Remove duplicate audio firmware type 
      • hammerhead: Make SYSTEM owner of cpu online files 
      • Gallery2 - Add 6.2Mp resolution set 
      • Gallery2: Handled seek to previous frame in case of video trim 
      • Camera: Fix out-of-order operations while setting up the editor 
      • Camera2: if camera HAL does not return valid picture formats do not show wrong defaults 
      • Implement SMS mark for unread 
      • jflte: assert: add jflterefreshspr 
      • jflte: Add missing Permissions for Step Sensor

      C-RoM KitKat

      Warning!
       
      This tutorial is only for Galaxy Note 3 SM-N900T (T-Mobile). Don’t try this guide on any other Android device. Also, we (True Android Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

      Pre Requisites:

      1. Backup your device data. You can follow our ultimate backup guide.

      2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

      3. You already have USB Driver Installed for Galaxy Note 3 SM-N900T (T-Mobile) in your PC. [Download USB Drivers]

      4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Note 3 SM-N900T (T-Mobile). [Guide].

      5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.0 and up installed. [Guide]

      If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based C-RoM v5.5 ROM on Galaxy Note 3 SM-N900T (T-Mobile).

      File Required(Download by clicking on it)
      1. C-RoM v5.5 For Galaxy Note 3 SM-N900T (T-Mobile)  [Filename: C-RoM-KK-v5.5-20140321-1135-hlte.zip]
      2. Google Apps [Filename: GApps_Standard_4.4.2_signed.zip] or any other 4.4 KitKat GApps

      How to Install Android 4.4.2 KitKat based C-RoM v5.5 ROM on Galaxy Note 3 SM-N900T (T-Mobile)

      1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
      2. Disconnect USB and then turn off your Galaxy Note 3 SM-N900T (T-Mobile).
      3. Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power to select an option. Alternatively try this: Recovery Mode without Key Combination.
      4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
      5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
      6. Select install zip from sdcard, then select choose zip from sdcard (or /sdcard1 for external storage). Now, locate the C-RoM v5.5 Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
      7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.2_signed.zip file instead of ROM zip to install the Google apps package.
      8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy Note 3 SM-N900T (T-Mobile) and boot up into Android 4.4.2 KitKat ROM C-RoM v5.5
      9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.
      Tutorial For TWRP Recovery Users:
      1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
      2. Disconnect USB and then turn off your Galaxy Note 3 SM-N900T (T-Mobile).
      3. Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. Alternatively try this: Recovery Mode without Key Combination.
      4. Create a Backup using TWRP Backup Option.
      5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
      6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the C-RoM v5.5 Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.2_signed.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
      7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your Galaxy Note 3 SM-N900T (T-Mobile) and boot up into Android 4.4.2 KitKat ROM C-RoM v5.5.
      8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.
      Congrats! Android 4.4.2 KitKat firmware based custom ROM C-RoM v5.5 is now installed and running on your Galaxy Note 3 SM-N900T (T-Mobile). [Note: Root may turned off by default in CM ROM, To enable it, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings]
      Read More
      // //

      Update Galaxy Note 3 SM-N900V Verizon To Android 4.4.2 KitKat via C-RoM–How To

      C-RoM v5.5 custom firmware for Galaxy Note 3 SM-N900V (Verizon) is now available. With the help of C-RoM v5.5 ROM you can update your Galaxy Note 3 SM-N900V (Verizon) to a well customized Android 4.4.2 KitKat. C-RoM development team recently released C-RoM v5.5 which comes with bug fixes and additional features. Some coll features of C-RoM are Pie, Halo, Appbar, Dark C-RoM, Active Display, Floating Windows, Gesture Anywhere, On-The-Go Mode, Animation Controls, Lockscreen notification and Implement App Sidebar. You can download and install custom firmware C-RoM v5.5 on your Galaxy Note 3 SM-N900V (Verizon). Since, Galaxy Note 3 SM-N900V (Verizon) is capable enough to run Android 4.4.2 KitKat smoothly, C-RoM v5.5 going to be a great experience for you. To learn how to flash this ROM, continue reading this guide to know how to install Android 4.4.2 KitKat based C-RoM v5.5 custom ROM on Galaxy Note 3 SM-N900V (Verizon).

      Related Readings:
        Some of the cool Android 4.4.2 KitKat features that you will enjoy is Screen Recording, Tap to Pay (Google Wallet for everyone), NFC emulation for non nfc devices, 14% less memory usage, cloud printing from Gallery, Google Home is the new Launcher, Core System Processes Trimmed, apps are efficient and responsive on all devices, the all new 'procstats tool details' memory use, Full-screen Immersive mode, seamless change in resolution during media playback, Phone dialer got local business detection, redesigned Quickoffice and many more.

        As said already, this ROM build is still under development and you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a better build.

        What's New in C-RoM v5.5:
        • ART Fixed 
        • New Performance Control Instead CM Performance Options. 
        • Battery Saver Mode From Omni. 
        • New Bootanimations by PartimusPrime 
        • FixedBattery Stats Always Awake 
        • Removed HALO Icon From Statusbar 
        • Base: Floating window with multitasking 
        • Implement App circle sidebar 
        • App Circle sidebar (add support floating window) 
        • App Circle sidebar (add support Samsung multiwindow flags) 
        • SystemUI: allow hiding notification icons 
        • Revert "Reimplement PowerSaverManager !" & Revert "Suspend Actions" (seems to eating battery not saving lol.) 
        • Revert "TeloRadio" 
        • Slim IME settings 
        • Add SmartCover stubs 
        • Base: fix MultiSelectListPreference NPE 
        • base: Fix screen on stats after a boot 
        • Separate Change Encryption Password Entry 
        • Add dock battery support. 
        • Changed PacBusyDialog C-RoM Logo 
        • Changed C-Tool Icon by 972style 
        • Revert "SMS Breath" 
        • Fix Floating window bug 
        • msm8960: Remove duplicate audio firmware type 
        • hammerhead: Make SYSTEM owner of cpu online files 
        • Gallery2 - Add 6.2Mp resolution set 
        • Gallery2: Handled seek to previous frame in case of video trim 
        • Camera: Fix out-of-order operations while setting up the editor 
        • Camera2: if camera HAL does not return valid picture formats do not show wrong defaults 
        • Implement SMS mark for unread 
        • jflte: assert: add jflterefreshspr 
        • jflte: Add missing Permissions for Step Sensor

        C-RoM KitKat

        Warning!
         
        This tutorial is only for Galaxy Note 3 SM-N900V (Verizon). Don’t try this guide on any other Android device. Also, we (True Android Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

        Pre Requisites:

        1. Backup your device data. You can follow our ultimate backup guide.

        2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

        3. You already have USB Driver Installed for Galaxy Note 3 SM-N900V (Verizon) in your PC. [Download USB Drivers]

        4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Note 3 SM-N900V (Verizon). [Guide].

        5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.0 and up installed. [Guide]

        If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based C-RoM v5.5 ROM on Galaxy Note 3 SM-N900V (Verizon).

        File Required(Download by clicking on it)
        1. C-RoM v5.5 For Galaxy Note 3 SM-N900V (Verizon)  [Filename: C-RoM-KK-v5.5-20140321-1135-hlte.zip]
        2. Google Apps [Filename: GApps_Standard_4.4.2_signed.zip] or any other 4.4 KitKat GApps

        How to Install Android 4.4.2 KitKat based C-RoM v5.5 ROM on Galaxy Note 3 SM-N900V (Verizon)

        1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
        2. Disconnect USB and then turn off your Galaxy Note 3 SM-N900V (Verizon).
        3. Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power to select an option. Alternatively try this: Recovery Mode without Key Combination.
        4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
        5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
        6. Select install zip from sdcard, then select choose zip from sdcard (or /sdcard1 for external storage). Now, locate the C-RoM v5.5 Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
        7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.2_signed.zip file instead of ROM zip to install the Google apps package.
        8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy Note 3 SM-N900V (Verizon) and boot up into Android 4.4.2 KitKat ROM C-RoM v5.5
        9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.
        Tutorial For TWRP Recovery Users:
        1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
        2. Disconnect USB and then turn off your Galaxy Note 3 SM-N900V (Verizon).
        3. Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. Alternatively try this: Recovery Mode without Key Combination.
        4. Create a Backup using TWRP Backup Option.
        5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
        6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the C-RoM v5.5 Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.2_signed.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
        7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your Galaxy Note 3 SM-N900V (Verizon) and boot up into Android 4.4.2 KitKat ROM C-RoM v5.5.
        8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.
        Congrats! Android 4.4.2 KitKat firmware based custom ROM C-RoM v5.5 is now installed and running on your Galaxy Note 3 SM-N900V (Verizon). [Note: Root may turned off by default in CM ROM, To enable it, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings]
        Read More
        // //

        Update Galaxy Note 3 LTE SM-N9005 To Android 4.4.2 KitKat via C-RoM–How To

        C-RoM v5.5 custom firmware for Galaxy Note 3 LTE SM-N9005 is now available. With the help of C-RoM v5.5 ROM you can update your Galaxy Note 3 LTE SM-N9005 to a well customized Android 4.4.2 KitKat. C-RoM development team recently released C-RoM v5.5 which comes with bug fixes and additional features. Some coll features of C-RoM are Pie, Halo, Appbar, Dark C-RoM, Active Display, Floating Windows, Gesture Anywhere, On-The-Go Mode, Animation Controls, Lockscreen notification and Implement App Sidebar. You can download and install custom firmware C-RoM v5.5 on your Galaxy Note 3 LTE SM-N9005. Since, Galaxy Note 3 LTE SM-N9005 is capable enough to run Android 4.4.2 KitKat smoothly, C-RoM v5.5 going to be a great experience for you. To learn how to flash this ROM, continue reading this guide to know how to install Android 4.4.2 KitKat based C-RoM v5.5 custom ROM on Galaxy Note 3 LTE SM-N9005.

        Related Readings:
          Some of the cool Android 4.4.2 KitKat features that you will enjoy is Screen Recording, Tap to Pay (Google Wallet for everyone), NFC emulation for non nfc devices, 14% less memory usage, cloud printing from Gallery, Google Home is the new Launcher, Core System Processes Trimmed, apps are efficient and responsive on all devices, the all new 'procstats tool details' memory use, Full-screen Immersive mode, seamless change in resolution during media playback, Phone dialer got local business detection, redesigned Quickoffice and many more.

          As said already, this ROM build is still under development and you should expect some bugs in it. All bugs and issues expected to be fixed as development progress towards a better build.

          What's New in C-RoM v5.5:
          • ART Fixed 
          • New Performance Control Instead CM Performance Options. 
          • Battery Saver Mode From Omni. 
          • New Bootanimations by PartimusPrime 
          • FixedBattery Stats Always Awake 
          • Removed HALO Icon From Statusbar 
          • Base: Floating window with multitasking 
          • Implement App circle sidebar 
          • App Circle sidebar (add support floating window) 
          • App Circle sidebar (add support Samsung multiwindow flags) 
          • SystemUI: allow hiding notification icons 
          • Revert "Reimplement PowerSaverManager !" & Revert "Suspend Actions" (seems to eating battery not saving lol.) 
          • Revert "TeloRadio" 
          • Slim IME settings 
          • Add SmartCover stubs 
          • Base: fix MultiSelectListPreference NPE 
          • base: Fix screen on stats after a boot 
          • Separate Change Encryption Password Entry 
          • Add dock battery support. 
          • Changed PacBusyDialog C-RoM Logo 
          • Changed C-Tool Icon by 972style 
          • Revert "SMS Breath" 
          • Fix Floating window bug 
          • msm8960: Remove duplicate audio firmware type 
          • hammerhead: Make SYSTEM owner of cpu online files 
          • Gallery2 - Add 6.2Mp resolution set 
          • Gallery2: Handled seek to previous frame in case of video trim 
          • Camera: Fix out-of-order operations while setting up the editor 
          • Camera2: if camera HAL does not return valid picture formats do not show wrong defaults 
          • Implement SMS mark for unread 
          • jflte: assert: add jflterefreshspr 
          • jflte: Add missing Permissions for Step Sensor

          C-RoM KitKat

          Warning!
           
          This tutorial is only for Galaxy Note 3 LTE SM-N9005. Don’t try this guide on any other Android device. Also, we (True Android Team) are not responsible for any damage caused due to the instruction given in this page. Try this at your own risk. However, it is very unlikely that your device will be damaged if you follow all the instructions as it is which are mentioned in procedure.

          Pre Requisites:

          1. Backup your device data. You can follow our ultimate backup guide.

          2.  Make sure your device have at least 60% battery power. You can install an app like Battery Notifier BT Free on your Android device to check it easily.

          3. You already have USB Driver Installed for Galaxy Note 3 LTE SM-N9005 in your PC. [Download USB Drivers]

          4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy Note 3 LTE SM-N9005. [Guide].

          5. Your device have latest CWM version 6.0.4.4 and up or TWRP 2.6.3.0 and up installed. [Guide]

          If you done everything that we mentioned above then you are ready to follow step-by-step guide on how to install Android 4.4.2 KitKat based C-RoM v5.5 ROM on Galaxy Note 3 LTE SM-N9005.

          File Required(Download by clicking on it)
          1. C-RoM v5.5 For Galaxy Note 3 LTE SM-N9005  [Filename: C-RoM-KK-v5.5-20140321-1135-hlte.zip]
          2. Google Apps [Filename: GApps_Standard_4.4.2_signed.zip] or any other 4.4 KitKat GApps

          How to Install Android 4.4.2 KitKat based C-RoM v5.5 ROM on Galaxy Note 3 LTE SM-N9005

          1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
          2. Disconnect USB and then turn off your Galaxy Note 3 LTE SM-N9005.
          3. Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. In recovery use Volume Keys to navigate between option and Power to select an option. Alternatively try this: Recovery Mode without Key Combination.
          4. Perform a Nandroid backup of your existing ROM that you can restore later if this new ROM not work or you want to go back into your previous ROM. To perform a backup, select Backup and Restore, then on the next screen, select Backup again. Go back to main recovery menu after backup is complete.
          5. Now, perform data wiping task. To do so, select wipe data/factory reset, then select Yes on next screen to confirm your action. Wait few minutes till the data wipe is complete. Now come back to CWM recovery main menu. Select wipe cache partition and after wiping process done, select Wipe Dalvik Cache under advance option to perform Dalvik cache wiping.
          6. Select install zip from sdcard, then select choose zip from sdcard (or /sdcard1 for external storage). Now, locate the C-RoM v5.5 Zip file that you copied earlier in Step 1 and select it by pressing Power button. Confirm installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
          7. Once the ROM installation process end, repeat the step 6 but choose the GApps_Standard_4.4.2_signed.zip file instead of ROM zip to install the Google apps package.
          8. When installation is completed, go back to the main recovery menu and select reboot system now to reboot your Galaxy Note 3 LTE SM-N9005 and boot up into Android 4.4.2 KitKat ROM C-RoM v5.5
          9. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select backup and restore then restore your previous ROM by selecting it from the list.
          Tutorial For TWRP Recovery Users:
          1. Connect your device to PC using USB cable and then copy downloaded files to the SD card of your device. Important: Don’t extract any files.
          2. Disconnect USB and then turn off your Galaxy Note 3 LTE SM-N9005.
          3. Now, boot into recovery mode. To do so, press and hold Volume Up, Home and Power button together until Samsung logo flash twice and then leave the button. You should see recovery menu soon. Alternatively try this: Recovery Mode without Key Combination.
          4. Create a Backup using TWRP Backup Option.
          5. Perform a Factory Reset (this will delete all apps and their settings and game progress). To do this, Tap on Wipe, then at the bottom of the screen do a Swipe on the ‘Swipe to factory reset‘ option.
          6. Now its time to add zip file for flashing. Tap on Install, then browse to the location where you saved the files and tap on the C-RoM v5.5 Zip file. Then tap on Add More Zips, and add GApps_Standard_4.4.2_signed.zip. Now at the bottom of the screen, do a swipe on the Swipe to confirm flash option to begin flashing.
          7. When installation is completed, go back to the main recovery menu and tap on Reboot and then, tap on System to reboot your Galaxy Note 3 LTE SM-N9005 and boot up into Android 4.4.2 KitKat ROM C-RoM v5.5.
          8. Returning to Previous ROM: To go back to your previous ROM, boot into recovery, select Backup then through Restore option, restore your previous ROM by selecting it from the list.
          Congrats! Android 4.4.2 KitKat firmware based custom ROM C-RoM v5.5 is now installed and running on your Galaxy Note 3 LTE SM-N9005. [Note: Root may turned off by default in CM ROM, To enable it, enable developer settings first (tap the build number 8 times under about device), then enable root under Developer Settings]
          Read More